PRODUCT

— 产品展示 —

产品名称: 燃气汽车电控(ECU-EASY X)

产品型号:ECU-EASY X

 

DescriptionEASY X ECU is designed for 3-4 cylinders multipoint timed sequential injection engines. While running on gas, EASY X considers the petrol injection time and the pressure on the rail to calculate the equivalent amount of gas to be injected in the intake manifold to replicate the perform

产品详情

Description

EASY X ECU is designed for 3-4 cylinders multipoint timed sequential injection engines. While running on gas, EASY X considers the petrol injection time and the pressure on the rail to calculate the equivalent amount of gas to be injected in the intake manifold to replicate the performance of the engine running on petrol EASY X is equipped with a diagnosis system on every Gas component, whose status can be monitored by the calibration software during the installation of the system and at any moment of the engine lifetime. This feature may preventmalfunctioning problems and makes technical interventions easier.
In addition, the calibration tool offers guided procedures for simplifying the system installation and setting.
Thanks to the combination of EASY X and PTMAP sensor, the installation steps are further simplified and the costs highly reduced.
EASY X’s compact case favors an easy installation of the ECU inside the engine compartment. EASY X is equipped with a 48-PIN new generation automotive connector, with an IP high protection degree (6K9K) against water infiltrations and an easy leverage system for cable connection/disconnection. The cable is characterized by a security system on the connector that prevents accidental release of the wiring.

Tech. Specifications
Supply voltage: Vbatt=10÷16V
Operating temperature: -40÷120°C
Protection fuse:MAX 15A
Current absorption with the actuators disabled: Imax ≤0.5A
Current absorption in standby mode: Istandby ≤0.5A
Actuators managed:up to 4 injectors with the following characteristics: Imax=6A, Vbat max=16V
Wire output:gas solenoid valves Pmax=50W, Imax=4A.
  • 没有了!
  • 没有了!